BDP-2 Firmware Update

Hello A belated Happy New Year to One and all. New Member here so just finding my way around this site, i have been useing the hoildays to get to grips with my bdp-2 and bda-2 a couple of issues have sprung up and i would appreciate somw advice. On the main Bryston Bdp 2 page it is showing the update firmware box highlighted but when i press update the following happens it starts the process but then this message comes up

Downloading firmware filesystem
3826 100% @3826
Downloading boot drivers
0 100% @2216
Downloading vmlinuz image
0 100% @3014
Running Filesystem Check: 25ab5d749f904e236e4437fc34a548da /lib/live/mount/medium/live/filesystem.new
: Filsystem Check Failed: md5 values different
Should Be:
Calculated: 25ab5d74
You should try redownloading this version of the firmware and try again


i have tried to install it 5 times but it just keeps coming up like this

Welcome to the site.

Would you happen to know which version of the firmware is currently installed? It begins with an S.

Cheers
Chris

Hi Chris this is on the display window S2.04 2014 05 20

Cheers
Simon

This is a known issue with this firmware, you'll need to place the BDP into service mode and email us the service id along with a short reminder that the firmware needs to be updated. Any version that is older then S2.05 (not including S2.05) will be unable to update its firmware using the automated method and will need to be updated manually.

crice[at]bryston[dot]com

Cheers,
Chris

Hi Chris

e mail sent

Cheers
Simon

Hi Chris
Can i just confirm you received my e mail as i had a slight problem with my email yesterday which i wasn't aware off

Thanks
simon