BDP3 not recognized by my.bryston.com

Discuss Bryston's BDP-3 Digital Music Player

BDP3 not recognized by my.bryston.com

by idrachman » Sun Aug 19, 2018 10:13 pm

hello,
Recent issue. Had turned off my system for most of the summer. Turned BDP3 and BDA3 back on and went to my.bryston.com. BDP3 not showing up on screen.
went to IP address of the device and it says its now unsecured when I access the web page. When I show the virtual panel, its a bunch of characters, nothing able to be understood.
This is the log for the web server:
[Sun Aug 19 22:04:55 2018] [notice] Apache/2.2.22 (Debian) PHP/5.4.41-0+deb7u1 configured -- resuming normal operations
[Sun Aug 19 22:05:44 2018] [error] [client 192.168.1.48] PHP Notice: Undefined offset: 0 in /var/www/mpd/crash.php on line 49, referer: http://bryston-bdp3/bryston/
[Sun Aug 19 22:06:44 2018] [error] [client 192.168.1.48] PHP Warning: file_get_contents(http://vps96186.vps.ovh.ca/connected): failed to open stream: Connection timed out in /var/www/mpd/mpd.library.php on line 459, referer: http://bryston-bdp3/bryston/

I go to update-firmware and it never returns the firmware available.

Current firmware is:
S2.37 2018-06-14
Build: Manic Moose
MPD: 0.19.21 NEWS
Kernel: 3.16-0.bpo.2-486


Thanks,
Ian
idrachman
 
Posts: 9
Joined: Sun Mar 11, 2018 5:33 pm

Re: BDP3 not recognized by my.bryston.com

by Chris Rice » Mon Aug 20, 2018 3:05 pm

Will the BDP go into service mode from either the GUI or using the menu on the front of the unit?

http://support.bryston.com/downloads/BD ... Manual.pdf

Chris
Bryston Ltd.
Engineer
User avatar
Chris Rice
 
Posts: 149
Joined: Wed Aug 20, 2014 2:39 pm

Re: BDP3 not recognized by my.bryston.com

by idrachman » Tue Aug 21, 2018 9:54 am

Hi Chris,
I click on start/stop or try to click on the checkbox and neither works. It says Ready, but the Service Mode still says "Off."
I did a hard start and stop - pushing power button and turning back on. DIdn't disconnect power cord. No difference. Still unable to start service mode.
I tried again, As of this morning it states service mode is ON!
Good luck!
idrachman
 
Posts: 9
Joined: Sun Mar 11, 2018 5:33 pm

Re: BDP3 not recognized by my.bryston.com

by Chris Rice » Wed Aug 22, 2018 11:22 pm

Does bradio work?
Bryston Ltd.
Engineer
User avatar
Chris Rice
 
Posts: 149
Joined: Wed Aug 20, 2014 2:39 pm

Re: BDP3 not recognized by my.bryston.com

by idrachman » Fri Aug 24, 2018 5:29 pm

Audio works through USB. Music server was activated, turned it off, only using ROON USB worked fine - all resolutions.
Still doesn't stop trying to get most current version - says internet not accessible. Still doesn't show on my.bryston.com.
Virtual front panel image attached (See update below).

Update @ 4:40PM ET: after reboot, the virtual front panel is working fine. The actual panel is also correct.
Music is playing ok through USB. AES does not work, even though it says on my BDA3 is has a lock at 44.1K.
Thanks,
Ian
Attachments
bdp3screen-Drachman.jpg
bdp3screen-Drachman.jpg (114.74 KiB) Viewed 320 times
idrachman
 
Posts: 9
Joined: Sun Mar 11, 2018 5:33 pm

Re: BDP3 not recognized by my.bryston.com

by idrachman » Thu Aug 30, 2018 12:56 pm

internet access resolved - somehow on my router this device was blocked from internet. That's been corrected and am now able to download latest #beta firmware.
Consider this posting resolved. Thank you for your support.
idrachman
 
Posts: 9
Joined: Sun Mar 11, 2018 5:33 pm


Return to BDP-3

Who is online

Users browsing this forum: No registered users and 0 guests

cron