Error 09 After Power Failure

Discuss Bryston's discontinued BDP-1 Digital Music Player

Error 09 After Power Failure

by jphabc54 » Fri Apr 19, 2019 1:25 am

My previously fully functional BDP-1 is throwing an Error 09 after I had a power outage this week. When it attempts to power back up, my DAC engages and locks but the “Initializing..” screen eventually times out after2 minutes with the Error 09. I reviewed the standard checks for this error and confirmed that the connectors across the boards inside the box are snug. After no luck with that, I flashed my CF back card to stock MM 2.0. No change in behavior there either. Anything else I can try at this point to troubleshoot at home?

I have no USB devices attached to the BDP-1. Connecting/disconnecting DAC and Ethernet result in identical behavior.

Thanks for any thoughts.
jphabc54
 
Posts: 4
Joined: Tue Jan 23, 2018 2:22 am

Re: Error 09 After Power Failure

by Chris Rice » Mon Apr 22, 2019 7:50 pm

Page 11 of the BDP-2 manual has information regarding these error codes and also contains the BDP-1 relevant information. We've also been noticing the the CR2032 coin cell battery on the system boards failing and the side effect is also an error 09 message.

http://bryston.com/PDF/Manuals/300030[BDP2].pdf

Chris
Bryston Ltd.
Engineer
User avatar
Chris Rice
 
Posts: 168
Joined: Wed Aug 20, 2014 2:39 pm

Re: Error 09 After Power Failure

by jphabc54 » Tue Apr 23, 2019 1:22 pm

Thank you -- I replaced the battery and the CF card and still getting the Error 09. I will try replacing the ribbon cable.
jphabc54
 
Posts: 4
Joined: Tue Jan 23, 2018 2:22 am

Re: Error 09 After Power Failure

by jphabc54 » Fri Apr 26, 2019 11:39 am

I tried a new serial cable, which did not fix the problem either. It seems the serial bus on the main board or the front panel board could be causing the problem. Are there any more tests I can run to check the serial port performance? Loopback test or something? Thanks.
jphabc54
 
Posts: 4
Joined: Tue Jan 23, 2018 2:22 am

Re: Error 09 After Power Failure

by Chris Rice » Mon May 13, 2019 2:09 pm

Just call us for service
Bryston Ltd.
Engineer
User avatar
Chris Rice
 
Posts: 168
Joined: Wed Aug 20, 2014 2:39 pm


Return to BDP-1

Who is online

Users browsing this forum: No registered users and 3 guests

cron