BR20 Release Notes (autoextracted) - 2023/10/17 2023.10b MPFS12 Test release. --------- RELEASE NOTES (LATEST ON TOP)--------------------- Added optn Vol jump filter (norm disable), 2023.10b added message "Set MAX Vol dB" when is EEPROM redefaulted Fixing MENU bug 2023.10a ReEnablePIcmds after BREAK: 1s --> 0.33s REVERTED (2023.08e) Turned off FPGS program display. 2023.08d Fixed saving of the status bit2 (ETH on in stby) 2023.08c Restored, same as 07b 2023.08b Cleared I/O expander outputs in Standby 2023.07b Changed timings for switch-on XUSB and I2C1/4 bus. 2023.07a Changed FIRMWARE LINK PATH to http://support.bryston.com/downloads/BR-20/Firmware/ and in WebPages2/firmwareup.htm 2023.06e Adjusted timing for FPGA, PI USB startup 2023.06c Changed PCA0_IO1 to out as HD_CLK_SUB (norm 0) 2023.06b Working payload.h N=3588 FPGA for MB4 (autodetect) 2023.06a Added cmd #10INITFPGA for FPGA on BR20 MB4.0 2023.03a Fixed BR20BC web GUI fw path bugs,test server calls 2022.12a,b Recomped bootloader 2022.11 for Pic32mx695F512L 2022.11a Fixed missing balance init in volume_init. 2022.09a Implementing anti-PI-spam protection, vol prob. 2022.08b Fixed balance.cgi bug. 2022.06a Fixed a bug in 05d of calling UpdateSPDIF in PI. 2022.05e Reduced "TCPIP WByte TOut" from 1m to 10s. 2022.05d fixed SPDIF loss of lock in pwrup at 96k+. Prevented spurious src sw by PI in shutdown, Fixed PI play track display restore after volume. 2022.05c Added global save and restore all names. 2022.05b Added global trigger1 and trigger2 dflt menu. Enabled I2C_DEBUG_DUMP_ENABLE (uses RS232). 2022.05a TESTMODE flag disables 0-cross halting. Fixed auto initialization on blank unit. 2022.04x Changed VOL_MAX_SAFE_mB to -4000 (-40dB) 2022.04c Fixed switched channel output trigg bug. 2022.04b Added SYSTEM INFO-->TRIGR OUT SETUP screen. 2022.04a Fixed 5s OK ping to PI to recover missing ack. 2022.03e Scrn saver disable by select even Brightness value. Added temporary mute for PI-AnalogBYPASS-PI switching. Fixed Default EEPROM-MUTE-0dB volume bug Added PI cmd GETOUTPUT. 2022.03d Fixed BCON cmd responses: HEADPHONEOUT and STANDARDOUT. Added #10RATE command. 2022.03c Fixed VOL_DFLT_MAXVOL_mB bug. Reverted to +12dB 2022.03b releases for Roon 22-03-04 or later. 2022.03a Modified disp refresh to accomodate PI Changed scr saver to 20 minutes. 2022.02x MkXI Added OLED scr saver 60s. Deflt Vol Max=0dB. 2022.02x MkX Fixed memory leakage in pi_Open 2022.02x MkIX Fixing IO6 UART reset (1360) 2022.02x MkVIII Fixing crash in pi.c buf[16], s_rx_overrun (1359). 2022.02x MkVII Added SAVEBITMAP and PI cmds overrun protection. 2022.02x MkIV Appended \n byte after .END. for all PI commds. 2022.02x MkIII Added reject SAVEBITMAP cmd by g_executing_vol_flg 2022.02l MkIII Added GG mod for g_p2p2_pause_flg 2022.02l Made BAUD_RATE=PI_BAUDRATE_Hz=9600/115200 2022.02d Set PI_BAUDRATE_Hz=115200 (was 9600) 2022.02c Protected PI initialization Speeded up PI command response. 2022.01f Sent to server evry 24h or on powered on and stndby. 2022.01e Muted analog pop after power-on. 2022.01d Inverted IO5, active low. 2022.01c Made TRIG per source, not global. 2021.11e Added antipopping mute in HDMI-DSD 2021.11d Added vol enc filter against UDU and DUD events 2021.11c Fix p2p2 interpt stuck with g_inside_update==1, Added more robust PI RX buffer overrun protection. 2021.11b Fixed spurious input name on disp. after switching. 2021.11a ---- OLDEST RELEASE NOTES -------------------------------------