On line upgrade file location

Currently we use the following dropbox location for the upgrade files:

http://dl.dropboxusercontent.com/u/189059481/readme.txt
http://dl.dropboxusercontent.com/u/1890 ... lNotes.htm
http://dl.dropboxusercontent.com/u/189059481/SP3.bin
http://dl.dropboxusercontent.com/u/1890 ... ctions.pdf

To copy a file, copy-and-paste one of the following URL into a browser window and press or click enter.
Note: directory contents cannot be viewed, only individual files can be accessed by the above links.
Current firmware revision is 2014.12b.

[updated 11-april-2016]

The current firmware update files have been placed in the new server, the new paths are as follows:

http://support.bryston.com/downloads/sp ... readme.txt
http://support.bryston.com/downloads/sp ... lNotes.htm
http://support.bryston.com/downloads/sp ... re/SP3.bin
http://support.bryston.com/downloads/sp ... ctions.pdf

(Note: http://support.bryston.com/downloads/...
and http://support.bryston.com/firmware/...
are aliases and can be used interchangeably)

Application notes and other documents:

Controlling SP3 through RS232 and/or TCP/IP
http://dl.dropboxusercontent.com/u/1890 ... _tcpip.doc

DOLBY VOLUME screen explanations
http://dl.dropboxusercontent.com/u/1890 ... Screen.doc

Error Status screen explanations
http://dl.dropboxusercontent.com/u/1890 ... creens.doc

Instructions how to upload and upgrade SP3 firmware
http://dl.dropboxusercontent.com/u/1890 ... ctions.doc

Application notes 1 on HDMI - basics
http://dl.dropboxusercontent.com/u/1890 ... Notes1.doc

Application notes 2 on HDMI - audio output
http://dl.dropboxusercontent.com/u/1890 ... Notes2.doc

Application notes 3 on HDMI - how to use HDMI Startup option
http://dl.dropboxusercontent.com/u/1890 ... Notes3.doc

Application notes 4 on HDMI - about a non-recommended firmware '00051027'
http://dl.dropboxusercontent.com/u/1890 ... Notes4.doc

Application notes 5 on HDMI - specs for the non-4K and 4K boards
http://dl.dropboxusercontent.com/u/1890 ... Notes5.doc

Explanations of DTS HDMA 192k and Dolby THD 192k settings
http://dl.dropboxusercontent.com/u/1890 ... tRates.doc

Explanations of Idle screen SRC/IN/OUT and VOLUME fields
http://dl.dropboxusercontent.com/u/1890 ... ations.doc

List of Infra-red remote controller codes
http://dl.dropboxusercontent.com/u/1890 ... _Codes.doc

Explanations of parameters and options in the MISCELLANEOUS and OTHER menus
http://dl.dropboxusercontent.com/u/1890 ... cOther.doc

Explanations of how to start and run a built-in noise generator to set up speaker levels
http://dl.dropboxusercontent.com/u/1890 ... seTest.doc

List of available commands that can be sent through RS232 or TCP/IP to control SP3
http://dl.dropboxusercontent.com/u/1890 ... mmands.doc

Instructions how to set up Ethernet for SP3
http://dl.dropboxusercontent.com/u/1890 ... g_LAN2.doc

Explanations of subwoofer setup
http://dl.dropboxusercontent.com/u/1890 ... rSetup.doc

Instruction how to setup a USB conenction between a PC and SP3
http://dl.dropboxusercontent.com/u/1890 ... struct.doc

List of video format codes (returned by the VFMT command)
http://dl.dropboxusercontent.com/u/1890 ... t_cmds.doc

Explanations how to use SP3 embedded web page interface using an internet browser
http://dl.dropboxusercontent.com/u/1890 ... eGuide.doc

(added 23/09/15)
Pink and band-limited noise tests
http://dl.dropboxusercontent.com/u/1890 ... seTest.doc

[updated 11-april-2016]

The current firmware update files have been placed in the new server, the documents
above can be all accessed by navigating to:
http://support.bryston.com/downloads/sp3/

Firmware revision 2015.04b was uploaded today in the dropbox directory. See RelNotes.htm. It adjusts some bass downmixing levels, implements HDMI sync recovery (CBL/SAT source only) for cable decoder boxes and includes 4K/60Hz/4:2:0 firmware update (000X222A) for HDMI board (4K only and has to be manually executed in MISC menu, see readme.txt!)
Stan Bleszynski
Bryston

The online upgrade seemed to have moved from Dropbox to the Bryston support site:

http://support.bryston.com/firmware/sp/

its been moved ever so slightly again to

http://support.bryston.com/firmware/sp3/