SP2 No Sound w/ 5.1 Bypass at Turn On

Hey everyone,

I didn't see a SP2 forum so I thought this might be the best place to post my issue. I have a Bryston SP2 that I'm trying to use 5.1 bypass with my computer. Works fine when I switch to 5.1 bypass via the remote or front panel button, and I then save the settings. The problem I'm having is when I turn the unit off and then back on, the 5.1 bypass light is still on and the display reads "5.1 bypass", but I do not get any sound of the processor. Turning 5.1 off and then back on gets the sound to work again, so it's just an issue at turn-on.

I've tried just about everything I could think of including disabling the digital input, disabling digital lock, resetting to factory defaults, etc. Please let me know if anyone has any idea on how to fix this. I'm also wondering if this will be covered until the 20 year analog warranty, or 5 year digital warranty.

Thanks,
Chris

Bryston SP2 pre/pro
Mark Levinson 433 amplifier
Thiel CS-2.4 speakers

I directed your question to Mike Pickett, he will be able to help with the SP2.
Stan

Hi Chris;

I've sent you an e-mail; please confirm that you get it...

This issue can likely be solved either through a software update, or by resetting the unit to factory defaults. The discreet code for the reset is (code) 254.

Thanks,

Mike

Hey Mike,

I sent you a picture of my date codes, I believe it was built in 2008. I've tried resetting to factory defaults but that didn't seem to do the trick.

Serial number: SP2-000463
Date: 0841
Rev: 926

Thanks,
Chris