BDP2 Error9

Discuss Bryston's BDP-2 Digital Music Player

BDP2 Error9

by jimsmy » Sat Oct 27, 2018 8:41 pm

My BDP2 recently registered error 9 and I followed the suggested checks and a re flash of the CF card. This did not correct the error; I checked the re flashed card in my BDP1 and it worked correctly. I noticed a high pitched noise from around the power supply board that disappears when the unit is activated (green light on).
Any advise would be appreciate.
Posts: 1
Joined: Sat Oct 27, 2018 7:31 pm

Re: BDP2 Error9

by Nazzareno » Mon Dec 03, 2018 1:15 pm

Hi Jim,
I dont't know about the noise from the power board.
However I experienced the issue you advised once, but simply cycling the power, by disconnecting and reconnecting the power cable, the error was resolved.
Hope this information will be useful for you.
Nazzareno Lelii
Ascoli Piceno ITALY
Posts: 8
Joined: Thu Nov 29, 2018 2:44 pm
Location: Ascoli Piceno - Italy

Return to BDP-2

Who is online

Users browsing this forum: No registered users and 1 guest